For 100% original products, let’s Goto
For timely delivery, let's goto
FOR EASY RETURNS, LET'S GOTO.
Connect the power supply and the load, you can supply to the controller.
It displayed as a measured temperature.
Press the SET button, the display flashes the temperature;
Press – to set the desired temperature;
After setting press SET to confirm return;
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:
Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display — as high-temperature protection.
P0 :Cooling / Heating; Range: C/H; Default: C
P1 :Hysteresis Setting; Range:0.1-15; Default: 2
P2: Highest Setting Limit; Range:110; Default: 110
P3: Lowest setting Limit; Range:-50; Default: -50
P4 :Temperature Correction; Range:-7-7°c; Default: 0°c
P5: Delay Start Time; Range:0-10 Minute; Default: 0
P6: High temperature alarm; Range:0-110; Default: Off
When the Thermostat is power off, long press “- or +”, you can restore the factory settings.